PartsTable
Technical Data Sheet
Download PDF

145S7-16D — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

145S7-16D: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM, design_type: THREADED, thread_class: 3B, overall_diameter: 2.375 INCHES NOMINAL IN, surface_treatment: ANODIZE, inside_diameter_length: 0.813 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-816-5605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
145S7-16D
NSN: 5340-00-816-5605
FSC: 5340 — Hardware, Commercial
CAGE: F6275 — EATON SAS (FRA)
SPECIFICATIONS
materialALUMINUM
design_typeTHREADED
thread_class3B
overall_diameter2.375 INCHES NOMINAL IN
surface_treatmentANODIZE
inside_diameter_length0.813 INCHES NOMINAL IN
end_item_identification4720-01-322-7079
round_cap_outside_surface_conditionRIBBED
thread_size_and_series/type_designator1-5/16-12 UN
NSN5340-00-816-5605
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 145S7-16D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 2.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
THREAD CLASS: 3B
•
MATERIAL: ALUMINUM
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-5/16-12 UN
•
INSIDE DIAMETER LENGTH: 0.813 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER2.375 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
THREAD CLASS3B
END ITEM IDENTIFICATION4720-01-322-7079
MATERIALALUMINUM
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-5/16-12 UN
INSIDE DIAMETER LENGTH0.813 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONRIBBED
SUBSTITUTES & CROSS-REFERENCES 5
7D0224C16C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
145S7-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
7D0224Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
145-S7-16D12Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340001343247Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 145S7-16D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 145S7-16D?
145S7-16D is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 145S7-16D?
There are 5 known substitutes for 145S7-16D: 7D0224C16C12, 145S7-16, 7D0224 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 145S7-16D?
145S7-16D is cataloged in the U.S. Government catalog under NSN 5340-00-816-5605. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 145S7-16D