PartsTable
Technical Data Sheet
Download PDF

145DS100-4 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

145DS100-4: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL ROLLER, cup_width: 1.0596 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN, cone_width: 1.3366 INCHES MINIMUM AND 1.3386 INCHES MAXIMUM IN, bore_diameter: 7.7941 INCHES MINIMUM AND 7.7953 INCHES MAXIMUM IN, overall_width: 1.6475 INCHES MINIMUM AND 1.6615 INCHES MAXIMUM IN, standout_width: 0.5905 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-114-6337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
145DS100-4
NSN: 3110-01-114-6337
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialSTEEL ROLLER
cup_width1.0596 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
cone_width1.3366 INCHES MINIMUM AND 1.3386 INCHES MAXIMUM IN
bore_diameter7.7941 INCHES MINIMUM AND 7.7953 INCHES MAXIMUM IN
overall_width1.6475 INCHES MINIMUM AND 1.6615 INCHES MAXIMUM IN
standout_width0.5905 INCHES NOMINAL IN
special_featuresBEARING TO BE FABRICATED TO U.O.SCLASS K TOLERANCES
style_designatorSTRAIGHT BORE, KEYWAY CONE, NORMAL ANGLE
cone_corner_radius0.0500 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
backface_corner_radius0.1400 INCHES MAXIMUM IN
overall_outside_diameter10.7464 INCHES MINIMUM AND 10.7480 INCHES MAXIMUM IN
material_document_and_classificationFED-STD-66 FED STD SINGLE MATERIAL RESPONSE RETAINER
NSN3110-01-114-6337
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 145DS100-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.0596 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT BORE, KEYWAY CONE, NORMAL ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66 FED STD SINGLE MATERIAL RESPONSE RETAINER
•
OVERALL OUTSIDE DIAMETER: 10.7464 INCHES MINIMUM AND 10.7480 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.0596 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT BORE, KEYWAY CONE, NORMAL ANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE CONE
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE CUP
OVERALL WIDTH1.6475 INCHES MINIMUM AND 1.6615 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER10.7464 INCHES MINIMUM AND 10.7480 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.1400 INCHES MAXIMUM IN
CONE CORNER RADIUS0.0500 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
145DS100Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
145DS100-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy 145DS100-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 145DS100-4?
145DS100-4 is a BEARING,ROLLER,TAPERED.
What parts can replace 145DS100-4?
There are 2 known substitutes for 145DS100-4: 145DS100, 145DS100-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 145DS100-4?
145DS100-4 is cataloged in the U.S. Government catalog under NSN 3110-01-114-6337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 145DS100-4