145622 — SOLENOID ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

145622: SOLENOID ASSEMBLY.

The SOLENOID ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, split_width: 0.094 INCHES NOMINAL IN, overall_length: 0.438 INCHES NOMINAL IN, inside_diameter: 1.031 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, special_features: 1/16 IN. BY 45 DEG CHAMFER AT LARGE END ID IN, style_designator: WIRE.

This part is cataloged in the U.S. Government catalog under NSN 5365-00-353-2448, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

145622

NSN: 5365-00-353-2448
NIINs: 003532448, 004090759, 013535868
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 08683 — BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
split_width	0.094 INCHES NOMINAL IN
overall_length	0.438 INCHES NOMINAL IN
inside_diameter	1.031 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
special_features	1/16 IN. BY 45 DEG CHAMFER AT LARGE END ID IN
style_designator	WIRE
taper_included_angle	26 DEG
tapered_portion_length	0.438 INCHES NOMINAL IN
end_item_identification	4030-01-246-4140 HOIST HOOK,AIRCRAFT MODEL CH-53E/MH-53E HELO
large_end_outside_diameter	0.963 INCHES MINIMUM AND 0.968 INCHES MAXIMUM IN
material_document_and_classification	QQ-S-633, COMP FSC1020-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
NSN	5365-00-353-2448

COMPONENT DIAGRAM

KEY FEATURES

•

TAPERED PORTION LENGTH: 0.438 INCHES NOMINAL IN

•

LARGE END OUTSIDE DIAMETER: 0.963 INCHES MINIMUM AND 0.968 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633, COMP FSC1020-CANCELED FED SPEC SINGLE MATERIAL RESPONSE

•

INSIDE DIAMETER: 0.628 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 1020

•

SPLIT WIDTH: 0.094 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

TAPERED PORTION LENGTH	0.438 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER	0.963 INCHES MINIMUM AND 0.968 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633, COMP FSC1020-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH	0.438 INCHES NOMINAL IN
INSIDE DIAMETER	0.628 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
SPECIAL FEATURES	1/16 IN. BY 45 DEG CHAMFER AT LARGE END ID IN
MATERIAL	STEEL COMP 1020
SPLIT WIDTH	0.094 INCHES NOMINAL IN
TAPER INCLUDED ANGLE	26 DEG

SUBSTITUTES & CROSS-REFERENCES 5

141316HSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

A282318Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

16868FReference document

Same NSN cross-reference

Reference document — Secondary reference

1246Y233Reference document

Same NSN cross-reference

Reference document — Secondary reference

A173067Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 145622?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 145622?

145622 is a SOLENOID ASSEMBLY.

What parts can replace 145622?

There are 5 known substitutes for 145622: 141316H, A282318, 16868F and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 145622?

145622 is cataloged in the U.S. Government catalog under NSN 5365-00-353-2448. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

145622 — SOLENOID ASSEMBLY

Request a Quote — 145622