PartsTable
Technical Data Sheet
14530 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Velociraptors were probably very intelligent predators that hunted in packs. Although they only stood 60 centimeters tall, these carnivores were able to overpower prey animals considerably larger than themselves. These dinosaurs could run up to 65 kilometers per hour and due to their stiff tail they were able to accomplish fast turns.

To eat their prey, Velociraptors had eighty sharp and curved-back teeth in their snout, some of them 2.5 centimeters long. The Velociraptor is considered one of the most intelligent and fastest dinosaurs: a cunning hunter. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6804, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 14530
NSN: 3110-00-155-6804
FSC: 3110
CAGE: 09605 — BOMAG USA SUB OF UNITED DOMINION INDUSTRIES LTD (USA)
SPECIFICATIONS
colorBLACK
materialPLASTIC, POLYETHYLENE (PP)
base_styleMEDIUM SCREW
body_styleBUSHING MOUNT
body_width0.465 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
bulb_stylePAR (PARABOLIC, ALUMNIZED REFLECTOR)
body_length0.515 INCHES MAXIMUM IN
thread_class2A A
bore_diameter70.00 MILLIMETERS NOMINAL MM
overall_depth100.0 MILLIMETERS NOMINAL MM
overall_width15.0 INCHES NOMINAL IN
NSN3110-00-155-6804
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 14530 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
BORE SHAPE: STRAIGHT
MATERIAL: STEEL OUTER RING
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER: 125.00 MILLIMETERS NOMINAL MM
BORE DIAMETER: 70.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
SURFACE FINISH: GROUND
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER125.00 MILLIMETERS NOMINAL MM
BORE DIAMETER70.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH24.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
214-AInterchangeable
interchangeable cross-reference
interchangeable
900214Interchangeable
interchangeable cross-reference
interchangeable
9-857Interchangeable
interchangeable cross-reference
interchangeable
9-214Interchangeable
interchangeable cross-reference
interchangeable
AN515-8R4Interchangeable
interchangeable cross-reference
interchangeable
1027301-8-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14530?
14530 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14530?
There are 31 known substitutes for 14530: 214-A, 900214, 9-857 and 28 more. Substitute compatibility should be verified for your specific system.
Is 14530 still available?
14530 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14530