PartsTable
Technical Data Sheet
Download PDF

145121-02 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

145121-02: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, height: 0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, length: 0.269 INCHES MINIMUM AND 0.274 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 303, hole_diameter: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-675-8406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
145121-02
NSN: 5340-00-675-8406
FSC: 5340 — Hardware, Commercial
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
height0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
length0.269 INCHES MINIMUM AND 0.274 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 303
hole_diameter0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
surface_treatmentPASSIVATE
material_document_and_classificationMIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
NSN5340-00-675-8406
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 145121-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.269 INCHES MINIMUM AND 0.274 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
•
HEIGHT: 0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.269 INCHES MINIMUM AND 0.274 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
HEIGHT0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
WIDTH0.312 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR STEEL COMP 303
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
117513-02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340PL1524891Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 145121-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 145121-02?
145121-02 is a CLAMP,SYNCHRO.
What parts can replace 145121-02?
There are 2 known substitutes for 145121-02: 117513-02, 5340PL1524891. Substitute compatibility should be verified for your specific system.
What is the NSN for 145121-02?
145121-02 is cataloged in the U.S. Government catalog under NSN 5340-00-675-8406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 145121-02