PartsTable
Technical Data Sheet
Download PDF

145-1409 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

145-1409: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -55.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLACK, inside_diameter: 0.410 INCHES NOMINAL IN, outside_diameter: 0.770 INCHES NOMINAL IN, special_features: CCC A145-380 NO. 8 HOSE (FC350-8) AND CCC A107A-211 STRAIGHT JIC END FITTINGS, operating_pressure: 1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS.

This part is cataloged in the U.S. Government catalog under NSN 4720-01-503-7910, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
145-1409
NSN: 4720-01-503-7910
FSC: 4720 — Hose and Flexible Tubing
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
temp_rating-55.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorBLACK
inside_diameter0.410 INCHES NOMINAL IN
outside_diameter0.770 INCHES NOMINAL IN
special_featuresCCC A145-380 NO. 8 HOSE (FC350-8) AND CCC A107A-211 STRAIGHT JIC END FITTINGS
operating_pressure1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure5000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_item_identification2320-01-452-5579;VEHICLE TRACTOR TRUCK
inside_surface_conditionSMOOTH
media_for_which_designedAIR SINGLE RESPONSE
thread_series_designatorUNF FIRST END
NSN4720-01-503-7910
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 145-1409 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 41.500 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -55.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 1.750 INCHES IN
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED POLYESTER CORD AND 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED STEEL WIRE
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.770 INCHES NOMINAL IN
•
OPERATING PRESSURE: 1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
NOMINAL THREAD SIZE: 0.750 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH41.500 INCHES NOMINAL OVERALL IN
TEMP RATING-55.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS1.750 INCHES IN
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED POLYESTER CORD AND 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED STEEL WIRE
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.770 INCHES NOMINAL IN
OPERATING PRESSURE1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
EXTERIOR COLORBLACK
INSIDE DIAMETER0.410 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
A145-1374 SCHReference document
Same NSN cross-reference
Reference document — Drawing number reference only
A145-1409Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 145-1409?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 145-1409?
145-1409 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 145-1409?
There are 2 known substitutes for 145-1409: A145-1374 SCH, A145-1409. Substitute compatibility should be verified for your specific system.
What is the NSN for 145-1409?
145-1409 is cataloged in the U.S. Government catalog under NSN 4720-01-503-7910. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 145-1409

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.