PartsTable / O-RING / 1446-115
1446-115
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN, center_hole_diameter: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-579-7916, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1446-115
NSN: 5331-00-579-7916 FSC: 5331 — O-RINGCAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN center_hole_diameter 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-579-7916
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1446-115
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OUTSIDE DIAMETER 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
1723-2 Interchangeable interchangeable cross-reference
interchangeable
1111-5 Interchangeable interchangeable cross-reference
interchangeable
1111 Interchangeable interchangeable cross-reference
interchangeable
H82651 Interchangeable interchangeable cross-reference
interchangeable
5278-0000-115 Interchangeable interchangeable cross-reference
interchangeable
287-1004P13 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1446-115?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1446-115?
1446-115 is a O-RING.
What parts can replace 1446-115?
There are 30 known substitutes for 1446-115: 1723-2, 1111-5, 1111 and 27 more. Substitute compatibility should be verified for your specific system.
Is 1446-115 still available?
1446-115 is currently cancelled.
Request a Quote — 1446-115