PartsTable
Technical Data Sheet
PartsTable / MRO / 144562
144562 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BIAS GRID ASSEMBLY is a the manufacturer industrial component. Key specifications include nut_style: STAMPED, nut_height: 0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, width_across_flats: 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, electrical_resistance: 5.600 KILOHMS, end_item_identification: AIR CONDITIONER FTD-100, TRANS WORLD COMMUNICATION INC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-4562, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 144562
NSN: 5310-00-014-4562
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OVERALL
nut_styleSTAMPED
nut_height0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
width_across_flats0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
electrical_resistance5.600 KILOHMS
end_item_identificationAIR CONDITIONER FTD-100, TRANS WORLD COMMUNICATION INC
gripping_notch_quantity1
resistance_tolerance_in_percent-5.000 TO 5.000
mating_member_diameter_accommodated0.190 INCHES NOMINAL IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-014-4562
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 144562 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
GRIPPING NOTCH QUANTITY: 1
•
MATERIAL: STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NUT STYLE: STAMPED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
GRIPPING NOTCH QUANTITY1
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NUT STYLESTAMPED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATING MEMBER DIAMETER ACCOMMODATED0.190 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
103856Interchangeable
interchangeable cross-reference
interchangeable
10-3856-1Interchangeable
interchangeable cross-reference
interchangeable
A10-3856-12Interchangeable
interchangeable cross-reference
interchangeable
MS16555-646Interchangeable
interchangeable cross-reference
interchangeable
10122694Interchangeable
interchangeable cross-reference
interchangeable
10-3586Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 144562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 144562?
144562 is a BIAS GRID ASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 144562?
There are 13 known substitutes for 144562: 103856, 10-3856-1, A10-3856-12 and 10 more. Substitute compatibility should be verified for your specific system.
Is 144562 still available?
144562 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 144562

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026