PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14436 PC 51
14436 PC 51 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The PLUG,PIPE is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, duty_cycle: CONTINUOUS, flat_depth: 0.028 INCHES NOMINAL IDENTICAL ENDS IN, power_rating: 130.0 WATTS OUTPUT, winding_type: INDUCTION-SQUIRREL CAGE, overall_width: 4.000 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-225-5838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14436 PC 51
NSN: 4730-01-225-5838
FSC: 4730
CAGE: 15472 — SOLVENTUM PURIFICATION INC. DIV FILTRATION AND SEPARATION DIVISION (USA)
SPECIFICATIONS
phaseTHREE INPUT
duty_cycleCONTINUOUS
flat_depth0.028 INCHES NOMINAL IDENTICAL ENDS IN
power_rating130.0 WATTS OUTPUT
winding_typeINDUCTION-SQUIRREL CAGE
overall_width4.000 INCHES IN
cooling_methodNONVENTILATED
overall_height3.500 INCHES IN
overall_length6.480 INCHES IN
shaft_diameter0.128 INCHES NOMINAL IDENTICAL ENDS IN
mounting_methodFIXED BASE
special_featuresPOLYETHYLENE; 5 FR. CATHETER SIZE; 5 MM TIP L; RECOMMENDED GUIDEWIRE .035 IN.; 75 CM USABLE L.; RATED BURST PRESSURE 12 ATM; SHORT TIP (ST). MM
NSN4730-01-225-5838
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 14436 PC 51 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
14436Interchangeable
interchangeable cross-reference
interchangeable
F93K040Interchangeable
interchangeable cross-reference
interchangeable
PTA BALLOONInterchangeable
interchangeable cross-reference
interchangeable
31459-48Interchangeable
Same NIIN cross-reference
interchangeable
31549-48Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14436 PC 51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14436 PC 51?
14436 PC 51 is a PLUG,PIPE.
What parts can replace 14436 PC 51?
There are 5 known substitutes for 14436 PC 51: 14436, F93K040, PTA BALLOON and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14436 PC 51?
14436 PC 51 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-225-5838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14436 PC 51

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026