PartsTable
Technical Data Sheet
PartsTable / MRO / 143708
143708 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include body_style: W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE, body_width: 1.750 INCHES NOMINAL IN, body_height: 0.875 INCHES NOMINAL IN, body_length: 2.000 INCHES NOMINAL IN, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, reliability_indicator: NOT ESTABLISHED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-3988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 143708
NSN: 5330-00-085-3988
FSC: 5330
CAGE: 65586 — CHROMALOX INC DBA CHROMALOX PRECISION HEAT AND CONTROL, INC (USA)
SPECIFICATIONS
body_styleW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
body_width1.750 INCHES NOMINAL IN
body_height0.875 INCHES NOMINAL IN
body_length2.000 INCHES NOMINAL IN
section_quantity2
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
reliability_indicatorNOT ESTABLISHED
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
tolerance_range_per_section-10.00 TO 10.00 PERCENT 1ST SECTION AND -10.00 TO 10.00 PERCENT 2ND SECTION
schematic_diagram_designatorONE TERMINAL COMMON TO EACH SECTION
capacitance_value_per_section0.500 MICROFARADS 1ST SECTION AND 1.000 MICROFARADS 2ND SECTION
NSN5330-00-085-3988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 143708 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
143708Interchangeable
interchangeable cross-reference
interchangeable
2089Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 143708?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 143708?
143708 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 143708?
There are 2 known substitutes for 143708: 143708, 2089. Substitute compatibility should be verified for your specific system.
What is the NSN for 143708?
143708 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-085-3988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 143708

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026