PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1437-10
1437-10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTING LINK,RIGID is a the manufacturer industrial component. Key specifications include material: STEEL, body_diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, overall_length: 1.091 INCHES MINIMUM AND 1.105 INCHES MAXIMUM IN, special_features: W/2 PINS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-3710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1437-10
NSN: 5310-00-014-3710
FSC: 5310
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL
body_diameter0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
overall_length1.091 INCHES MINIMUM AND 1.105 INCHES MAXIMUM IN
special_featuresW/2 PINS
NSN5310-00-014-3710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1437-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES: UNF
•
PLATE THICKNESS: 0.035 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD CLASS: 2B
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNF
PLATE THICKNESS0.035 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD CLASS2B
SURFACE TREATMENTCHROMIUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
GRIPPING PRONG LENGTH0.078 INCHES NOMINAL IN
NUT HEIGHT0.316 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
695545-5Interchangeable
interchangeable cross-reference
interchangeable
1437-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1437-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1437-10?
1437-10 is a CONNECTING LINK,RIGID.
What parts can replace 1437-10?
There are 2 known substitutes for 1437-10: 695545-5, 1437-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 1437-10?
1437-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-3710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1437-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026