PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1433-3
1433-3 ✓ Verified by PartsTable
SES Creative · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Three surprises are waiting to be found. Find the puppies, with their soft white coats. With the four coloured airbrush pens you can give every puppy cheerful colours, dots and stripes.

Finished? Wash them clean under the tap and they are ready for a new creation! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-5035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1433-3
NSN: 3110-00-114-5035
FSC: 3110
CAGE: 82877 — ROTRON INCORPORATED (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
head_styleDOUBLE CHAMFER
head_height0.125 INCHES NOMINAL IN
thread_class2A A
bore_diameter0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
head_diameter0.375 INCHES NOMINAL IN
overall_width0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
thread_length0.141 INCHES MINIMUM IN
load_directionRADIAL
surface_finishGROUND
fastener_length0.375 INCHES NOMINAL IN
NSN3110-00-114-5035
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1433-3 · SES Creative ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL COMP E52100 BALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE SHIELD
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
MATERIALSTEEL COMP E52100 BALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE SHIELD
MATERIALSTEEL COMP 1010 RETAINER
MATERIALSTEEL COMP E52100 INNER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MATERIALSTEEL COMP 430F SHIELD
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
P-2011Interchangeable
interchangeable cross-reference
interchangeable
14333Interchangeable
interchangeable cross-reference
interchangeable
910-693-002-108Interchangeable
interchangeable cross-reference
interchangeable
5193705Interchangeable
interchangeable cross-reference
interchangeable
25-0013Interchangeable
interchangeable cross-reference
interchangeable
BD136Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1433-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1433-3?
1433-3 is a BEARING,BALL,ANNULAR manufactured by SES Creative.
What parts can replace 1433-3?
There are 8 known substitutes for 1433-3: P-2011, 14333, 910-693-002-108 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1433-3?
1433-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-5035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1433-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026