PartsTable
Technical Data Sheet
Download PDF

1429084 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

1429084: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP B1112, thread_length: 0.625 INCHES MINIMUM STUD THREAD IN, overall_length: 1.812 INCHES NOMINAL IN, thread_direction: RIGHT-HAND STUD THREAD, nominal_thread_size: 0.625 INCHES NUT THREAD IN, thread_pitch_diameters: +0.5675 TO 0.5705 INCHES STUD THREAD IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-036-3530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1429084
NSN: 3120-00-036-3530
NIINs: 000363530, 008099094
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 79500 — WESTINGHOUSE ELECTRIC CORP (USA)
SPECIFICATIONS
materialSTEEL COMP B1112
thread_length0.625 INCHES MINIMUM STUD THREAD IN
overall_length1.812 INCHES NOMINAL IN
thread_directionRIGHT-HAND STUD THREAD
nominal_thread_size0.625 INCHES NUT THREAD IN
thread_pitch_diameters+0.5675 TO 0.5705 INCHES STUD THREAD IN
thread_quantity_per_inch18 NUT THREAD
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) STUD THREAD
material_document_and_classificationQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
NSN3120-00-036-3530
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 1429084 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL THICKNESS: 0.5312 INCHES NOMINAL IN
•
DIAMETER: 2.4980 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL THICKNESS0.5312 INCHES NOMINAL IN
DIAMETER2.4980 INCHES NOMINAL IN
OUTSIDE DIAMETER4.4375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
13G468PC2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40J439PC44Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40J432PC14H831PC1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20F667PC18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
13G866PC44Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40J287PC2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 1429084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1429084?
1429084 is a BEARING,WASHER,THRUST.
What parts can replace 1429084?
There are 6 known substitutes for 1429084: 13G468PC2, 40J439PC44, 40J432PC14H831PC1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1429084?
1429084 is cataloged in the U.S. Government catalog under NSN 3120-00-036-3530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1429084