PartsTable
Technical Data Sheet
1428-2 ✓ Verified by PartsTable
Esselte · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Design and create your own dinosaur stickers. Colour your dinosaur in, fill the shaker with different sequins and stick the dinosaur cap on top. In addition to the dinosaur stickers, it also includes two sheets of dinosaur stickers.

You can colour these in with the markers and add extra decoration with the glitter glue. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1612, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1428-2
NSN: 5330-00-292-1612
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
length0.438 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
thread_length1.810 INCHES MINIMUM IN
flute_quantity4
overall_length3.375 INCHES NOMINAL IN
shank_diameter0.480 INCHES MINIMUM IN
style_designatorSTRAIGHT FLUTE
thread_directionRIGHT-HAND
thread_structureREGULAR
width_across_flats0.275 INCHES NOMINAL IN
starting_chamfer_typePLUG
thread_forming_methodGROUND
NSN5330-00-292-1612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1428-2 MFR: Esselte ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: SQUARE
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLE: ANGULAR
SURFACE TREATMENT: PLASTIC CASE
OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER: 1.438 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER2.378 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.438 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
604-3-4Interchangeable
interchangeable cross-reference
interchangeable
A-1526Interchangeable
interchangeable cross-reference
interchangeable
W1146Interchangeable
interchangeable cross-reference
interchangeable
49306Interchangeable
interchangeable cross-reference
interchangeable
14282Interchangeable
interchangeable cross-reference
interchangeable
TA11477-00-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1428-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1428-2?
1428-2 is a TAP,THREAD CUTTING manufactured by Esselte.
What parts can replace 1428-2?
There are 21 known substitutes for 1428-2: 604-3-4, A-1526, W1146 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1428-2?
1428-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1428-2