PartsTable
Technical Data Sheet
Download PDF

1428 — RESISTOR NETWORK,FIXED,FILM

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1428: RESISTOR NETWORK,FIXED,FILM.

Scotch™ Multi-Purpose Scissors is equipped with high quality, durable stainless steel blades with smooth cutting action great for photos, paper and crafts. Key specifications include material: STEEL BODY, valve_size: 6.000 INCHES IN, pressure_class: ERR-060, connection_type: FLANGE, ROUND W/HOLES, flange_diameter: 11.000 INCHES IN, flange_face_design: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-063-1276, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1428
NSN: 5310-00-063-1276
NIINs: 000631276, 001442089, 001964870, 002130557, 002238973, 002636648, 002688773, 004848168, 006406573, 007256981, 009253924, 009641217, 011041079, 012011296, 012691630, 013414532, 013590236, 013896483, 014353009
FSC: 5310 — Nuts and Washers
CAGE: 47562 — GAGE CO THE (USA)
SPECIFICATIONS
materialSTEEL BODY
valve_size6.000 INCHES IN
pressure_classERR-060
connection_typeFLANGE, ROUND W/HOLES
flange_diameter11.000 INCHES IN
flange_face_designPLAIN
face_to_face_distance10.500 INCHES IN
valve_operation_methodMANUAL
end_item_identificationUSED ON THE 170' PATROL COASTAL (PC-1) CLASS SHIPS
operating_pressure_and_type200.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
inlet_relationship_with_outletIDENTICAL
NSN5310-00-063-1276
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1428 · 3M ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
SPECIFICATION/STANDARD DATA: 80204-18.2.2-65 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NUT HEIGHT: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
NUT STYLE: SLOTTED, HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SPECIFICATION/STANDARD DATA80204-18.2.2-65 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NUT HEIGHT0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
NUT STYLESLOTTED, HEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH28
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
B18-2-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1428?
1428 is a RESISTOR NETWORK,FIXED,FILM manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1428?
There is 1 known substitute for 1428: B18-2-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 1428?
1428 is cataloged in the U.S. Government catalog under NSN 5310-00-063-1276. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1428

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.