PartsTable
Technical Data Sheet
Download PDF

14247PCA3187 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14247PCA3187: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1137 OVERALL, end_radius: 0.344 INCHES NOMINAL IN, fork_depth: 0.531 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.328 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, overall_width: 0.997 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-316-5054, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14247PCA3187
NSN: 5340-00-316-5054
FSC: 5340 — Hardware, Commercial
CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
materialSTEEL COMP 1137 OVERALL
end_radius0.344 INCHES NOMINAL IN
fork_depth0.531 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.328 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
overall_width0.997 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
thread_length1.250 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fork_span_width0.561 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.214 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES ROD CONNECTION IN
NSN5340-00-316-5054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14247PCA3187 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.561 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.214 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
•
END RADIUS: 0.344 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FORK SPAN WIDTH0.561 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
FORK ARM THICKNESS0.214 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
END RADIUS0.344 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.997 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.375 INCHES ROD CONNECTION IN
THREAD CLASS3A ROD CONNECTION A
SUBSTITUTES & CROSS-REFERENCES 9
N1072PCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X8840APCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MG150APCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20555PCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X9053PCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
14921PCA3187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 14247PCA3187?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14247PCA3187?
14247PCA3187 is a CLEVIS,ROD END.
What parts can replace 14247PCA3187?
There are 9 known substitutes for 14247PCA3187: N1072PCA3187, X8840APCA3187, MG150APCA3187 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14247PCA3187?
14247PCA3187 is cataloged in the U.S. Government catalog under NSN 5340-00-316-5054. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14247PCA3187

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.