PartsTable
Technical Data Sheet
Download PDF

14235-00 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14235-00: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.625 INCHES NOMINAL IN, special_features: 3/16 IN. LG BY 3/16 IN.

DIA STUD OPPOSITE MTG HOLES IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S. Government catalog under NSN 5340-00-772-6534, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14235-00
NSN: 5340-00-772-6534
FSC: 5340 — Hardware, Commercial
CAGE: 77294 — PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC DIV PIPER INDUSTRIAL MANUFACTURING COMPANY (USA)
SPECIFICATIONS
diameter0.265 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.625 INCHES NOMINAL IN
special_features3/16 IN. LG BY 3/16 IN. DIA STUD OPPOSITE MTG HOLES IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter2.062 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.781 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.406 INCHES NOMINAL IN
NSN5340-00-772-6534
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14235-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.265 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.781 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.265 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.781 INCHES NOMINAL IN
SPECIAL FEATURES3/16 IN. LG BY 3/16 IN. DIA STUD OPPOSITE MTG HOLES IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.406 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
LOOP INSIDE DIAMETER2.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 14235-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14235-00?
14235-00 is a CLAMP,LOOP.
What is the NSN for 14235-00?
14235-00 is cataloged in the U.S. Government catalog under NSN 5340-00-772-6534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14235-00

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.