PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 142226
142226 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL COMP 8740 OVERALL, cone_width: 1.1810 INCHES NOMINAL IN, head_style: HEXAGON, grip_length: 2.700 INCHES NOMINAL IN, head_height: 0.250 INCHES NOMINAL IN, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
142226
NSN: 3110-00-100-0761
FSC: 3110
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
cone_width1.1810 INCHES NOMINAL IN
head_styleHEXAGON
grip_length2.700 INCHES NOMINAL IN
head_height0.250 INCHES NOMINAL IN
thread_class2A A
bore_diameter1.1250 INCHES NOMINAL IN
grip_diameter0.8107 INCHES MINIMUM AND 0.8117 INCHES MAXIMUM IN
thread_length0.510 INCHES MAXIMUM IN
fastener_length3.210 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
thread_directionRIGHT-HAND
NSN3110-00-100-0761
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 142226 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0469 INCHES NOMINAL IN
•
CONE WIDTH: 1.1810 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.0469 INCHES NOMINAL IN
CONE WIDTH1.1810 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
BL107804Interchangeable
interchangeable cross-reference
interchangeable
368-4505-2Interchangeable
interchangeable cross-reference
interchangeable
BL107804ISSUE1Interchangeable
interchangeable cross-reference
interchangeable
142226Interchangeable
interchangeable cross-reference
interchangeable
3913DInterchangeable
interchangeable cross-reference
interchangeable
3198Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 142226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 142226?
142226 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 142226?
There are 21 known substitutes for 142226: BL107804, 368-4505-2, BL107804ISSUE1 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 142226?
142226 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 142226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026