Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLIDSOLID, overall_width: 0.135 INCHES NOMINAL IN, aperture_width: 2.746 INCHES NOMINAL2.746 INCHES NOMINAL IN, overall_height: 0.115 INCHES NOMINAL IN, overall_length: 0.340 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-080-0044, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→142025-0001
NSN:5330-01-080-0044 FSC:5330 CAGE:19397 — BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
material
RUBBER SYNTHETIC OVERALL
construction
SOLIDSOLID
overall_width
0.135 INCHES NOMINAL IN
aperture_width
2.746 INCHES NOMINAL2.746 INCHES NOMINAL IN
overall_height
0.115 INCHES NOMINAL IN
overall_length
0.340 INCHES MAXIMUM IN
aperture_length
6.806 INCHES NOMINAL6.806 INCHES NOMINAL IN
style_designator
NON-CIRCULAR
inside_corner_radius
0.100 INCHES MINIMUM AND 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
operating_temp_range
-55.0 TO 125.0 CELSIUS DEGC
special_test_features
MINIMUM IMPEDANCE: 40 OHMS AT 10 MEGAHERTZ AND 90 OHMS AT 100 MEGAHERTZ;MAXIMUM CURRENT: 5 AMPERES DC FOR LESS THAN 35 DEGREES CELSIUS TEMPERATURE RISE AT +90 DEGREES CELSIUS AMBIENT
end_item_identification
JOINT STRS RD E/I CAGE 28716
NSN
5330-01-080-0044
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE CORNER BEVEL LENGTH: 0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.970 INCHES MAXIMUM0.970 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
INSIDE CORNER RADIUS: 0.100 INCHES MINIMUM AND 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
•
APERTURE WIDTH: 2.746 INCHES NOMINAL2.746 INCHES NOMINAL IN
•
CONSTRUCTION: SOLIDSOLID
•
INSIDE CORNER BEVEL LENGTH: 0.380 INCHES MINIMUM AND 0.380 INCHES MINIMUM AND 0.680 INCHES MAXIMUM0.680 INCHES MAXIMUM IN
•
APERTURE LENGTH: 6.806 INCHES NOMINAL6.806 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER BEVEL LENGTH
0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.970 INCHES MAXIMUM0.970 INCHES MAXIMUM IN
STYLE DESIGNATOR
NON-CIRCULAR
INSIDE CORNER RADIUS
0.100 INCHES MINIMUM AND 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM0.120 INCHES MAXIMUM IN
APERTURE WIDTH
2.746 INCHES NOMINAL2.746 INCHES NOMINAL IN
CONSTRUCTION
SOLIDSOLID
INSIDE CORNER BEVEL LENGTH
0.380 INCHES MINIMUM AND 0.380 INCHES MINIMUM AND 0.680 INCHES MAXIMUM0.680 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 142025-0001?
142025-0001 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 142025-0001?
There are 3 known substitutes for 142025-0001: 4069-1, 142-025-0001, 9311415. Substitute compatibility should be verified for your specific system.
What is the NSN for 142025-0001?
142025-0001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-080-0044. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.