PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141951
141951 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUTTER,CARTRIDGE ACTUATED is a the manufacturer industrial component. Key specifications include firing_wire: NOT INCLUDED, jaw_diameter: 0.844 INCHES NOMINAL IN, mounting_bracket: NOT PROVIDED, time_delay_feature: NOT INCLUDED, dod_ammunition_code: 1377-M554, dot_registration_code: EX1988110863. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141951
NSN: 3110-00-100-0801
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
firing_wireNOT INCLUDED
jaw_diameter0.844 INCHES NOMINAL IN
mounting_bracketNOT PROVIDED
time_delay_featureNOT INCLUDED
dod_ammunition_code1377-M554
dot_registration_codeEX1988110863
dot_proper_shipping_nameCUTTERS, CABLE, EXPLOSIVE
dot_identification_numberUN0070
hazardous_material_classification_code1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION
NSN3110-00-100-0801
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 141951 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 3.5480 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0938 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
OUTSIDE DIAMETER3.5480 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OVERALL WIDTH0.8586 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
40-140Interchangeable
interchangeable cross-reference
interchangeable
70231W1ITEM13Interchangeable
interchangeable cross-reference
interchangeable
70329W1ITEM8Interchangeable
interchangeable cross-reference
interchangeable
10492-1Interchangeable
interchangeable cross-reference
interchangeable
10492Interchangeable
interchangeable cross-reference
interchangeable
604-3-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141951?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141951?
141951 is a CUTTER,CARTRIDGE ACTUATED.
What parts can replace 141951?
There are 28 known substitutes for 141951: 40-140, 70231W1ITEM13, 70329W1ITEM8 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 141951?
141951 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141951

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026