PartsTable
Technical Data Sheet
Download PDF

14175-24 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

14175-24: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include end_item_identification: OPHTHALMIC CHAIR, A/O REICHERT CUSTOM II, part_name_assigned_by_controlling_agency: RETAINER OPHTHALMIC CHAIR E.I. OPHTH CHAIR A/O REICHERT CUSTM II.

This part is cataloged in the U.S. Government catalog under NSN 3120-00-116-6498, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14175-24
NSN: 3120-00-116-6498
NIINs: 001166498, 015008315
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
end_item_identificationOPHTHALMIC CHAIR, A/O REICHERT CUSTOM II
part_name_assigned_by_controlling_agencyRETAINER OPHTHALMIC CHAIR E.I. OPHTH CHAIR A/O REICHERT CUSTM II
NSN3120-00-116-6498
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 14175-24 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.2130 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER
•
STATIC RADIAL LOAD RATING: 2754 POUNDS LBS
•
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC RACE LINER
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.2130 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM IN
STYLE DESIGNATORWITH INSERT AND/OR LINER
STATIC RADIAL LOAD RATING2754 POUNDS LBS
BORE DIAMETER0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
MATERIALPLASTIC RACE LINER
MATERIALSTEEL COMP 440C OUTER RACE MEMBER
MATERIALSTEEL COMP 440C INNER MEMBER
OUTER MEMBER OUTSIDE DIAMETER0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
1417-506Reference document
Same NSN cross-reference
Reference document — Secondary reference
LHSSVV3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14175-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14175-24?
14175-24 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace 14175-24?
There are 2 known substitutes for 14175-24: 1417-506, LHSSVV3. Substitute compatibility should be verified for your specific system.
What is the NSN for 14175-24?
14175-24 is cataloged in the U.S. Government catalog under NSN 3120-00-116-6498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14175-24