PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1416-08
1416-08 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.3540 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 0.5902 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-883-3631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1416-08
NSN: 3110-00-883-3631
FSC: 3110
CAGE: 91816 — CIRCOR AEROSPACE, INC. DBA CIRCOR AEROSPACE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.3540 INCHES NOMINAL IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter0.5902 INCHES NOMINAL IN
overall_outside_diameter1.0236 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-00-883-3631
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1416-08 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 0.5902 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
OVERALL OUTSIDE DIAMETER: 1.0236 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE SMALLEST DIAMETER0.5902 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL HEIGHT0.3540 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.0236 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A3218Interchangeable
interchangeable cross-reference
interchangeable
JW33-1936A1Interchangeable
interchangeable cross-reference
interchangeable
SM-C-780258-1Interchangeable
interchangeable cross-reference
interchangeable
32-18Interchangeable
interchangeable cross-reference
interchangeable
141608Interchangeable
interchangeable cross-reference
interchangeable
2274-0003Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1416-08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1416-08?
1416-08 is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace 1416-08?
There are 6 known substitutes for 1416-08: A3218, JW33-1936A1, SM-C-780258-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1416-08?
1416-08 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-883-3631. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1416-08

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026