PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1416-062
1416-062 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.4998 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN, overall_width: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: GROUND OD; EXTRA CAPACITY OUTER RING; OIL HOLE IN OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-2701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1416-062
NSN: 3110-00-902-2701
FSC: 3110
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.4998 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
overall_width0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresGROUND OD; EXTRA CAPACITY OUTER RING; OIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.6875 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-902-2701
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1416-062 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 0.4998 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL OVERALL
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
SPECIAL FEATURESGROUND OD; EXTRA CAPACITY OUTER RING; OIL HOLE IN OUTER RING
BORE DIAMETER0.4998 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIALSTEEL OVERALL
OVERALL WIDTH0.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
180300Interchangeable
interchangeable cross-reference
interchangeable
11602Interchangeable
interchangeable cross-reference
interchangeable
GB-85-OHInterchangeable
Same NIIN cross-reference
interchangeable
GB85X0HInterchangeable
Same NIIN cross-reference
interchangeable
4130501-17Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1416-062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1416-062?
1416-062 is a BEARING,ROLLER,NEEDLE.
What parts can replace 1416-062?
There are 5 known substitutes for 1416-062: 180300, 11602, GB-85-OH and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1416-062?
1416-062 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-2701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1416-062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026