PartsTable
Technical Data Sheet
PartsTable / MRO / 14142
14142 ✓ Verified by PartsTable
SES Creative · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Make your own Fashion glitter tattoos with this set from SES Creative. Stick the double-sided transparent stickers onto your skin and dab the glitter onto the sticky part with the brush. Personalise your tattoos by experimenting with different colours of glitter or even try mixing the glitter.

Cosmetically tested and easy to wash off skin. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0726, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 14142
NSN: 3110-00-100-0726
FSC: 3110
CAGE: 83120 — PRESSED METALS OF AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
body_styleCYLINDRICAL BUSHING MOUNTED
body_width4.000 INCHES MAXIMUM IN
cone_width0.9983 INCHES NOMINAL IN
nut_height0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
body_height5.250 INCHES MAXIMUM IN
body_length4.750 INCHES MAXIMUM IN
shaft_styleROUND
corner_shapeSQUARE ALL CORNERS
shaft_length1.500 INCHES NOMINAL IN
thread_class2B
NSN3110-00-100-0726
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 14142 · SES Creative ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.9983 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.1875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.9983 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER1.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
5031Interchangeable
interchangeable cross-reference
interchangeable
23043Interchangeable
interchangeable cross-reference
interchangeable
51866Interchangeable
interchangeable cross-reference
interchangeable
95-80-256Interchangeable
interchangeable cross-reference
interchangeable
12-2507DInterchangeable
interchangeable cross-reference
interchangeable
12-25C7DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14142?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14142?
14142 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by SES Creative. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14142?
There are 27 known substitutes for 14142: 5031, 23043, 51866 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14142?
14142 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14142

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026