PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141350
141350 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: PLASTIC LENS, lens_color: COLORLESS, overall_width: 2.562 INCHES NOMINAL IN, overall_height: 1.625 INCHES NOMINAL IN, overall_length: 13.875 INCHES NOMINAL IN, mounting_method: HOOK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141350
NSN: 5315-00-014-1350
FSC: 5315
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialPLASTIC LENS
lens_colorCOLORLESS
overall_width2.562 INCHES NOMINAL IN
overall_height1.625 INCHES NOMINAL IN
overall_length13.875 INCHES NOMINAL IN
mounting_methodHOOK
lamp_protection_deviceCLOSED END GUARD WITH HOOK
lens_surface_conditionSMOOTH BACK
lens_type_and_quantity1 FLAT, RECTANGULAR
voltage_rating_in_volts125.0 AC NOMINAL
wiring_provision_length600.0 INCHES NOMINAL SINGLE PROVISION IN
wiring_provision_methodCABLE ASSEMBLY
NSN5315-00-014-1350
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 141350 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.988 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL: COPPER ALLOY 464 OVERALL
•
PIN OVERALL DIAMETER: 0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-994 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.988 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
MATERIALCOPPER ALLOY 464 OVERALL
PIN OVERALL DIAMETER0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-994 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
7-150Interchangeable
interchangeable cross-reference
interchangeable
14-1350Interchangeable
interchangeable cross-reference
interchangeable
N5530Interchangeable
interchangeable cross-reference
interchangeable
1413-5017Interchangeable
interchangeable cross-reference
interchangeable
35186431Interchangeable
interchangeable cross-reference
interchangeable
1085-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141350?
141350 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 141350?
There are 6 known substitutes for 141350: 7-150, 14-1350, N5530 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 141350?
141350 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141350

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026