PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141284
141284 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN, pin_overall_diameter: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141284
NSN: 5315-00-014-1284
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
pin_overall_diameter0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-014-1284
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 141284 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH1.113 INCHES MINIMUM AND 1.137 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
9226Interchangeable
interchangeable cross-reference
interchangeable
51363-R PC7Interchangeable
interchangeable cross-reference
interchangeable
19060Interchangeable
interchangeable cross-reference
interchangeable
511-081800-0241-0541Interchangeable
interchangeable cross-reference
interchangeable
195263Interchangeable
interchangeable cross-reference
interchangeable
30554-69-561-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141284?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141284?
141284 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 141284?
There are 22 known substitutes for 141284: 9226, 51363-R PC7, 19060 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 141284?
141284 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141284

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026