PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141275
141275 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STOPPER,WASTE DRAIN is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141275
NSN: 5315-00-014-1275
FSC: 5315
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-014-1275
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 141275 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 1111, GACOMP 1112, GACOMP 1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.4959 INCHES MINIMUM AND 0.4964 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
6 MRT 4N-BInterchangeable
interchangeable cross-reference
interchangeable
6-4-6RBZBInterchangeable
interchangeable cross-reference
interchangeable
600-3TMTInterchangeable
interchangeable cross-reference
interchangeable
6-1-2365-20-376Interchangeable
interchangeable cross-reference
interchangeable
30191Interchangeable
interchangeable cross-reference
interchangeable
1-4X1 3-8L0MGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141275?
141275 is a STOPPER,WASTE DRAIN.
What parts can replace 141275?
There are 19 known substitutes for 141275: 6 MRT 4N-B, 6-4-6RBZB, 600-3TMT and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 141275?
141275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026