PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14122A

14122A — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, special_features: FURNISHED W/1 EACH 1/2-20 BY 2-1/4 HEX HEAD CAPSCREW,1 EACH 1/2 IN. MEDIUM LOCKWASHER,AND 1 EACH 1/2-20 NUT IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-803-6713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14122A
NSN: 5340-00-803-6713
FSC: 5340
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.875 INCHES NOMINAL IN
special_featuresFURNISHED W/1 EACH 1/2-20 BY 2-1/4 HEX HEAD CAPSCREW,1 EACH 1/2 IN. MEDIUM LOCKWASHER,AND 1 EACH 1/2-20 NUT IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.188 INCHES NOMINAL IN
loop_inside_diameter1.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.438 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.938 INCHES NOMINAL IN
NSN5340-00-803-6713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14122A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.188 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
SURFACE TREATMENT: CADMIUM BAND
•
MATERIAL: STEEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.188 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.938 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
SURFACE TREATMENTCADMIUM BAND
MATERIALSTEEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.875 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.438 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED W/1 EACH 1/2-20 BY 2-1/4 HEX HEAD CAPSCREW,1 EACH 1/2 IN. MEDIUM LOCKWASHER,AND 1 EACH 1/2-20 NUT IN
LOOP INSIDE DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
52400Interchangeable
interchangeable cross-reference
interchangeable
127841Interchangeable
interchangeable cross-reference
interchangeable
1412-2Interchangeable
interchangeable cross-reference
interchangeable
P26909Interchangeable
interchangeable cross-reference
interchangeable
365998012Interchangeable
interchangeable cross-reference
interchangeable
7349580Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14122A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14122A?
14122A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 14122A?
There are 12 known substitutes for 14122A: 52400, 127841, 1412-2 and 9 more. Substitute compatibility should be verified for your specific system.
Is 14122A still available?
14122A is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14122A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026