PartsTable
Technical Data Sheet
Download PDF

1411M18P29 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

1411M18P29: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include length: 2.000 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, design_type: PLATE, orifice_diameter: 0.620 INCHES NOMINAL IN, outside_diameter: 0.620 INCHES NOMINAL IN, special_features: PLATE 520; SST,SAE 300 SERIES; ANSI 300LB LBS. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-339-8090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1411M18P29
NSN: 4730-01-339-8090
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
length2.000 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
design_typePLATE
orifice_diameter0.620 INCHES NOMINAL IN
outside_diameter0.620 INCHES NOMINAL IN
special_featuresPLATE 520; SST,SAE 300 SERIES; ANSI 300LB LBS
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
end_item_identificationFIXTURE,TEST-COWL LEAK,4920-01-248-9002
hose/tube_size_for_which_designed2 IN. OD TUBE IN
NSN4730-01-339-8090
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 1411M18P29 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.000 INCHES NOMINAL IN
•
THREAD PROVISION: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED
•
DESIGN TYPE: PLATE
•
HOSE/TUBE SIZE FOR WHICH DESIGNED: 2 IN. OD TUBE IN
•
OUTSIDE DIAMETER: 0.620 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
LENGTH2.000 INCHES NOMINAL IN
THREAD PROVISIONUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
DESIGN TYPEPLATE
HOSE/TUBE SIZE FOR WHICH DESIGNED2 IN. OD TUBE IN
OUTSIDE DIAMETER0.620 INCHES NOMINAL IN
SPECIAL FEATURESPLATE 520; SST,SAE 300 SERIES; ANSI 300LB LBS
END ITEM IDENTIFICATIONFIXTURE,TEST-COWL LEAK,4920-01-248-9002
MATERIALSTEEL CORROSION RESISTING
ORIFICE DIAMETER0.620 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
1411M18Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
520Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1411M18P29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1411M18P29?
1411M18P29 is a RESTRICTOR,FLUID FLOW.
What parts can replace 1411M18P29?
There are 2 known substitutes for 1411M18P29: 1411M18, 520. Substitute compatibility should be verified for your specific system.
What is the NSN for 1411M18P29?
1411M18P29 is cataloged in the U.S. Government catalog under NSN 4730-01-339-8090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1411M18P29

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.