PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141108
141108 ✓ Verified by PartsTable
Duracell · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET,EYE,ROTATING SHAFT is a Duracell industrial component. Key specifications include width: 1.450 INCHES NOMINAL IN, material: STEEL, overall_height: 1.450 INCHES NOMINAL IN, overall_length: 2.570 INCHES NOMINAL IN, special_features: BORE CENTERLINE TO BASE BOTTOM IS 0.281IN.; C TO C BETWEEN BOLT HOLES IS 0.25IN. IN, bore_inside_diameter: 0.098 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1108, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141108
NSN: 5315-00-014-1108
FSC: 5315
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
width1.450 INCHES NOMINAL IN
materialSTEEL
overall_height1.450 INCHES NOMINAL IN
overall_length2.570 INCHES NOMINAL IN
special_featuresBORE CENTERLINE TO BASE BOTTOM IS 0.281IN.; C TO C BETWEEN BOLT HOLES IS 0.25IN. IN
bore_inside_diameter0.098 INCHES NOMINAL IN
mounting_hole_nominal_diameter0.203 INCHES IN
mounting_hole_type_and_quantity2 PLAIN
NSN5315-00-014-1108
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 141108 · Duracell ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OVERALL
•
PIN OVERALL DIAMETER: 0.1218 INCHES MINIMUM AND 0.1223 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OVERALL
PIN OVERALL DIAMETER0.1218 INCHES MINIMUM AND 0.1223 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
30-026Interchangeable
interchangeable cross-reference
interchangeable
7210Interchangeable
interchangeable cross-reference
interchangeable
323P180Interchangeable
interchangeable cross-reference
interchangeable
202KLL2FS122Interchangeable
interchangeable cross-reference
interchangeable
25700Interchangeable
interchangeable cross-reference
interchangeable
88502X1ANG5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141108?
141108 is a BRACKET,EYE,ROTATING SHAFT manufactured by Duracell.
What parts can replace 141108?
There are 19 known substitutes for 141108: 30-026, 7210, 323P180 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 141108?
141108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-014-1108. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026