PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14080-1
14080-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,PRESSURE,ANTI-G SUIT is a the manufacturer industrial component. Key specifications include fsc_application_data: LIFE SUPPORT SYSTEM, end_item_identification: VAU-45(V)2/A, reference_data_and_literature: T.O. 14P3-1-161, general_characteristics_item_description: HIGH FLOW.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-448-4479, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14080-1
NSN: 5340-00-448-4479
FSC: 5340
CAGE: 24301 — CHESAPEAKE SYSTEMS CORP
SPECIFICATIONS
fsc_application_dataLIFE SUPPORT SYSTEM
end_item_identificationVAU-45(V)2/A
reference_data_and_literatureT.O. 14P3-1-161
general_characteristics_item_descriptionHIGH FLOW
NSN5340-00-448-4479
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14080-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPORTING OBJECT/SURFACE ATTACHMENT METHOD: TWO 0.095 IN. DIA MTG HOLES ON 0.625 IN. MTG CENTERS IN
•
SURFACE TREATMENT: GOLD
•
MATERIAL: COPPER ALLOY
•
ATTACHMENT TO ITEM SUPPORTED METHOD: FRICTION FIT OVER RD FLAT WASHER
TECHNICAL CHARACTERISTICS (FLIS)
SUPPORTING OBJECT/SURFACE ATTACHMENT METHODTWO 0.095 IN. DIA MTG HOLES ON 0.625 IN. MTG CENTERS IN
SURFACE TREATMENTGOLD
MATERIALCOPPER ALLOY
ATTACHMENT TO ITEM SUPPORTED METHODFRICTION FIT OVER RD FLAT WASHER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
14080-1Interchangeable
interchangeable cross-reference
interchangeable
4810PL1142206Interchangeable
interchangeable cross-reference
interchangeable
14080Interchangeable
interchangeable cross-reference
interchangeable
1660PL0662068Interchangeable
interchangeable cross-reference
interchangeable
M87255-2Interchangeable
interchangeable cross-reference
interchangeable
1408Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14080-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14080-1?
14080-1 is a VALVE,PRESSURE,ANTI-G SUIT.
What parts can replace 14080-1?
There are 6 known substitutes for 14080-1: 14080-1, 4810PL1142206, 14080 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14080-1?
14080-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-448-4479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14080-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026