PartsTable
Technical Data Sheet
Download PDF

1407M81P06 — PIN,STRAIGHT,KNURLED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1407M81P06: PIN,STRAIGHT,KNURLED.

The PIN,STRAIGHT,KNURLED is a the manufacturer industrial component. Key specifications include diameter: 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, material: STEEL OVERALL, knurl_length: 1.000 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, first_end_style: RADIUS, second_end_style: CHAMFERED W/THRU HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-496-3071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1407M81P06
NSN: 5315-01-496-3071
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
diameter0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
materialSTEEL OVERALL
knurl_length1.000 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
first_end_styleRADIUS
second_end_styleCHAMFERED W/THRU HOLE
special_featuresKNURL, MEDIUM DIAMOND
style_designatorDIAMOND KNURLED
first_end_taper_length0.060 INCHES NOMINAL IN
knurl_outside_diameter0.750 INCHES NOMINAL IN
end_item_identificationF16 ENGINE
first_end_corner_radius0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
NSN5315-01-496-3071
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1407M81P06 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNURL OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
KNURL LENGTH: 1.000 INCHES NOMINAL IN
•
FIRST END STYLE: RADIUS
•
STYLE DESIGNATOR: DIAMOND KNURLED
•
DIAMETER: 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
KNURL OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
KNURL LENGTH1.000 INCHES NOMINAL IN
FIRST END STYLERADIUS
STYLE DESIGNATORDIAMOND KNURLED
DIAMETER0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
OVERALL LENGTH1.750 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SPECIAL FEATURESKNURL, MEDIUM DIAMOND
SECOND END STYLECHAMFERED W/THRU HOLE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1407M81P06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1407M81P06?
1407M81P06 is a PIN,STRAIGHT,KNURLED.
What is the NSN for 1407M81P06?
1407M81P06 is cataloged in the U.S. Government catalog under NSN 5315-01-496-3071. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1407M81P06

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.