PartsTable
Technical Data Sheet
Download PDF

14074416 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14074416: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-044-8389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14074416
NSN: 5340-01-044-8389
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
diameter0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_diameter0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
surface_treatmentENAMEL BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-698 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.012 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-E-57298(ME) MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-E-52835 MIL SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-044-8389
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14074416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-E-57298(ME) MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-E-52835 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
MATERIAL DIAMETER: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.012 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-E-57298(ME) MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-E-52835 MIL SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL DIAMETER0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.012 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
SURFACE TREATMENTENAMEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14074416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14074416?
14074416 is a CLAMP,LOOP.
What is the NSN for 14074416?
14074416 is cataloged in the U.S. Government catalog under NSN 5340-01-044-8389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14074416

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.