PartsTable
Technical Data Sheet
Download PDF

140535 — FILTER ELEMENT,FLUID

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

140535: FILTER ELEMENT,FLUID.

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include temp_rating: -65.0 FAHRENHEIT MINIMUM AND 350.0 FAHRENHEIT MAXIMUM DEGF, fsc_application_data: FUEL PUMP,ENGINE,ACFT, media_for_which_designed: FUEL/OIL, HYDROCARBON, filtration_rating_in_microns: 5.0 NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
140535
NSN: 3110-00-100-0204
NIINs: 001000204, 009435631
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
temp_rating-65.0 FAHRENHEIT MINIMUM AND 350.0 FAHRENHEIT MAXIMUM DEGF
fsc_application_dataFUEL PUMP,ENGINE,ACFT
media_for_which_designedFUEL/OIL, HYDROCARBON
filtration_rating_in_microns5.0 NOMINAL
NSN3110-00-100-0204
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 140535 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 0.8820 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH0.8820 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
K337Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MH5DReference document
Same NSN cross-reference
Reference document — Secondary reference
0604394Reference document
Same NSN cross-reference
Reference document — Secondary reference
0604394-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
80R163Reference document
Same NSN cross-reference
Reference document — Secondary reference
337Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 140535?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 140535?
140535 is a FILTER ELEMENT,FLUID.
What parts can replace 140535?
There are 7 known substitutes for 140535: K337, MH5D, 0604394 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 140535?
140535 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 140535

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.