PartsTable
Technical Data Sheet
Download PDF

14052-SS-1032-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14052-SS-1032-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, shaft_length: 2.000 INCHES NOMINAL IN, thread_class: 3B, thread_length: 0.400 INCHES NOMINAL IN, major_diameter: 0.312 INCHES NOMINAL IN, overall_length: 4.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-398-8669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14052-SS-1032-7
NSN: 5340-01-398-8669
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
shaft_length2.000 INCHES NOMINAL IN
thread_class3B
thread_length0.400 INCHES NOMINAL IN
major_diameter0.312 INCHES NOMINAL IN
overall_length4.000 INCHES NOMINAL IN
mounting_methodTHREADED SHAFT
handle_clearance2.000 INCHES NOMINAL IN
style_designatorROUND
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
integral_shaft_styleROUND
NSN5340-01-398-8669
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14052-SS-1032-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTEGRAL SHAFT STYLE: ROUND
•
MOUNTING METHOD: THREADED SHAFT
•
THREAD LENGTH: 0.400 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
SHAFT LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INTEGRAL SHAFT STYLEROUND
MOUNTING METHODTHREADED SHAFT
THREAD LENGTH0.400 INCHES NOMINAL IN
STYLE DESIGNATORROUND
OVERALL LENGTH4.000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SHAFT LENGTH2.000 INCHES NOMINAL IN
HANDLE CLEARANCE2.000 INCHES NOMINAL IN
THREAD CLASS3B
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
71-2739883-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14052-SS-1032-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14052-SS-1032-7?
14052-SS-1032-7 is a HANDLE,BOW.
What parts can replace 14052-SS-1032-7?
There is 1 known substitute for 14052-SS-1032-7: 71-2739883-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 14052-SS-1032-7?
14052-SS-1032-7 is cataloged in the U.S. Government catalog under NSN 5340-01-398-8669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14052-SS-1032-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.