Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SWITCH,PUSH is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, material: STEEL BAND, body_style: BUSHING MOUNTED, body_width: 0.850 INCHES MAXIMUM IN, slot_width: 0.344 INCHES NOMINAL IN, body_height: 5.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5340-00-282-7502, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→1405-7-3
NSN:5340-00-282-7502 FSC:5340 CAGE:7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
diameter
0.344 INCHES NOMINAL IN
material
STEEL BAND
body_style
BUSHING MOUNTED
body_width
0.850 INCHES MAXIMUM IN
slot_width
0.344 INCHES NOMINAL IN
body_height
5.000 INCHES NOMINAL IN
body_length
1.210 INCHES MAXIMUM IN
slot_length
0.438 INCHES NOMINAL IN
overall_width
0.563 INCHES NOMINAL IN
bushing_length
0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
inclosure_type
UNINCLOSED
actuator_height
0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
NSN
5340-00-282-7502
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-00640 T2 OR 3 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: STEEL BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.719 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-S-00640 T2 OR 3 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL
STEEL BAND
STYLE DESIGNATOR
SINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1405-7-3?
1405-7-3 is a SWITCH,PUSH. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1405-7-3?
There are 12 known substitutes for 1405-7-3: 10126792, 4PB716T2, 753-00344-02 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1405-7-3?
1405-7-3 is cataloged in the Federal Logistics Information System under NSN 5340-00-282-7502. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.