PartsTable
Technical Data Sheet
Download PDF

1404500 — STUD,CONTINUOUS THREAD

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1404500: STUD,CONTINUOUS THREAD.

The STUD,CONTINUOUS THREAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SHEET SPRING, nut_width: 0.500 INCHES MAXIMUM IN, nut_length: 1.062 INCHES MAXIMUM IN, surface_treatment: ALUMINUM OVERALL, material_thickness: 0.025 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-021-2665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1404500
NSN: 5310-01-021-2665
NIINs: 010212665, 012101762
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSHEET SPRING
nut_width0.500 INCHES MAXIMUM IN
nut_length1.062 INCHES MAXIMUM IN
surface_treatmentALUMINUM OVERALL
material_thickness0.025 INCHES MAXIMUM IN
mounting_hole_diameter0.135 INCHES NOMINAL IN
nut_mounting_provisionSTRAIGHT HOLES
mounting_hole_arrangement_style2 HOLES
mating_member_diameter_accommodated0.205 INCHES NOMINAL IN
distance_from_aperture_center_to_mounting_hole_center0.375 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length0.750 INCHES NOMINAL IN
NSN5310-01-021-2665
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1404500 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.500 INCHES MAXIMUM IN
•
NUT LENGTH: 1.062 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.135 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES MAXIMUM IN
•
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 0.750 INCHES NOMINAL IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.205 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NUT WIDTH0.500 INCHES MAXIMUM IN
NUT LENGTH1.062 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.135 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES MAXIMUM IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.750 INCHES NOMINAL IN
MATING MEMBER DIAMETER ACCOMMODATED0.205 INCHES NOMINAL IN
SURFACE TREATMENTALUMINUM OVERALL
NUT STYLESHEET SPRING
SUBSTITUTES & CROSS-REFERENCES 1
12-11020-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1404500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1404500?
1404500 is a STUD,CONTINUOUS THREAD.
What parts can replace 1404500?
There is 1 known substitute for 1404500: 12-11020-11. Substitute compatibility should be verified for your specific system.
What is the NSN for 1404500?
1404500 is cataloged in the U.S. Government catalog under NSN 5310-01-021-2665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1404500

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.