PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14037967
14037967 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RETAINER,HELICAL COMPRESSION SPR. Key specifications include overall_height: 0.250 INCHES NOMINAL IN, style_designator: IRREGULAR, end_hole_diameter: 0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, body_inside_diameter: 1.120 INCHES NOMINAL IN, body_outside_diameter: 1.159 INCHES MINIMUM AND 1.165 INCHES MAXIMUM IN, casehardening_indicator: NOT CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-162-8846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14037967
NSN: 5340-01-162-8846
FSC: 5340
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
overall_height0.250 INCHES NOMINAL IN
style_designatorIRREGULAR
end_hole_diameter0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
body_inside_diameter1.120 INCHES NOMINAL IN
body_outside_diameter1.159 INCHES MINIMUM AND 1.165 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
NSN5340-01-162-8846
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14037967 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 1.159 INCHES MINIMUM AND 1.165 INCHES MAXIMUM IN
•
END HOLE DIAMETER: 0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: IRREGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1012 ASSN STD 2ND MATERIAL RESPONSE AND SAE 1013 ASSN STD 3RD MATERIAL RESPONSE AND SAE 1016 ASSN STD 4TH MATERIAL RESPONSE AND SAE 1017 ASSN STD 5TH MATERIAL RESPONSE AND SAE 1018 ASSN STD 6TH MATERIAL RESPONSE AND SAE 1019 ASSN STD 7TH MATERIAL RESPONSE AND SAE 1020 ASSN STD 8TH MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
BODY INSIDE DIAMETER: 1.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY OUTSIDE DIAMETER1.159 INCHES MINIMUM AND 1.165 INCHES MAXIMUM IN
END HOLE DIAMETER0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
STYLE DESIGNATORIRREGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1012 ASSN STD 2ND MATERIAL RESPONSE AND SAE 1013 ASSN STD 3RD MATERIAL RESPONSE AND SAE 1016 ASSN STD 4TH MATERIAL RESPONSE AND SAE 1017 ASSN STD 5TH MATERIAL RESPONSE AND SAE 1018 ASSN STD 6TH MATERIAL RESPONSE AND SAE 1019 ASSN STD 7TH MATERIAL RESPONSE AND SAE 1020 ASSN STD 8TH MATERIAL RESPONSE
MATERIALSTEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
OVERALL HEIGHT0.250 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
BODY INSIDE DIAMETER1.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
HM89449Interchangeable
interchangeable cross-reference
interchangeable
15375Interchangeable
interchangeable cross-reference
interchangeable
731355Interchangeable
interchangeable cross-reference
interchangeable
905070-1Interchangeable
interchangeable cross-reference
interchangeable
354E001Interchangeable
interchangeable cross-reference
interchangeable
J7322Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14037967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14037967?
14037967 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 14037967?
There are 13 known substitutes for 14037967: HM89449, 15375, 731355 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14037967?
14037967 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-162-8846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14037967

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026