PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 140319
140319 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include unit_type: TRANSDUCER, case_shape: ROUND, special_features: -65 DEG TO 350 DEG F DEGF, installation_design: FIXED, end_item_identification: AIRCRAFT A400M, part_name_assigned_by_controlling_agency: WHEELSPEED TRANSDUCER AND ADAPTER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9639, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
140319
NSN: 5330-00-291-9639
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
unit_typeTRANSDUCER
case_shapeROUND
special_features-65 DEG TO 350 DEG F DEGF
installation_designFIXED
end_item_identificationAIRCRAFT A400M
part_name_assigned_by_controlling_agencyWHEELSPEED TRANSDUCER AND ADAPTER
NSN5330-00-291-9639
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 140319 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
SEAL WIDTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
SEAL WIDTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
55-22034Interchangeable
interchangeable cross-reference
interchangeable
EAP240319Interchangeable
interchangeable cross-reference
interchangeable
240319Interchangeable
interchangeable cross-reference
interchangeable
1135-33AND1135-43Interchangeable
interchangeable cross-reference
interchangeable
125-26Interchangeable
interchangeable cross-reference
interchangeable
460-5-115AND125-4-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 140319?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 140319?
140319 is a GASKET.
What parts can replace 140319?
There are 25 known substitutes for 140319: 55-22034, EAP240319, 240319 and 22 more. Substitute compatibility should be verified for your specific system.
Is 140319 still available?
140319 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 140319

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026