PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1402428
1402428 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B SECOND END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-396-1404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1402428
NSN: 4720-01-396-1404
FSC: 4720
CAGE: 07443 — LANDOLL CORPORATION DBA LANDOLL CORPORATION DREXEL DIVISION DIV DREXEL (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B SECOND END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES SECOND END IN
NSN4720-01-396-1404
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 1402428 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
THREAD DIRECTION: RIGHT-HAND SECOND END
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
CONNECTION TYPE: THREADED INTERNAL TUBE SECOND END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAT ANGLE37.0 DEGREES FIRST END
THREAD DIRECTIONRIGHT-HAND SECOND END
SEAT ANGLE37.0 DEGREES SECOND END
INSIDE DIAMETER0.375 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
END CONNECTION DESIGNSTRAIGHT FIRST END
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TEMP RATING-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
120 33/64Interchangeable
interchangeable cross-reference
interchangeable
2510 33/64Interchangeable
interchangeable cross-reference
interchangeable
C08840Interchangeable
interchangeable cross-reference
interchangeable
51033Interchangeable
interchangeable cross-reference
interchangeable
USA1867Interchangeable
interchangeable cross-reference
interchangeable
BMSA15117Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1402428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1402428?
1402428 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 1402428?
There are 10 known substitutes for 1402428: 120 33/64, 2510 33/64, C08840 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1402428?
1402428 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-396-1404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1402428

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026