PartsTable
Technical Data Sheet
Download PDF

14018630 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14018630: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP 1010 OVERALL, overall_width: 0.750 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-157-9825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14018630
NSN: 5340-01-157-9825
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
diameter0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP 1010 OVERALL
overall_width0.750 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC OVERALL
material_thickness0.036 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
distance_from_loop_center_to_tongue_end2.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.850 INCHES NOMINAL IN
NSN5340-01-157-9825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14018630 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.036 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORMULTIPLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.036 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.250 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.850 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14018630?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14018630?
14018630 is a CLAMP,LOOP.
What is the NSN for 14018630?
14018630 is cataloged in the U.S. Government catalog under NSN 5340-01-157-9825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14018630

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.