PartsTable
Technical Data Sheet
Download PDF

1401-7324-1MM — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1401-7324-1MM: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hole_diameter: 11.5 MILLIMETERS NOMINAL ALL HOLES MM, overall_width: 46.0 MILLIMETERS NOMINAL MM, overall_length: 130.0 MILLIMETERS NOMINAL MM, end_item_identification: 2355-01-5602318, outside_corner_bevel_length_along_length: 15.65 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-653-8927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1401-7324-1MM
NSN: 5330-01-653-8927
FSC: 5330 — Packing and Gasket Materials
CAGE: 0SW64 — BUFFERS USA, INC. DBA BUFFERS USA INC (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hole_diameter11.5 MILLIMETERS NOMINAL ALL HOLES MM
overall_width46.0 MILLIMETERS NOMINAL MM
overall_length130.0 MILLIMETERS NOMINAL MM
bolt_hole_quantity2
end_item_identification2355-01-5602318
outside_corner_bevel_length_along_length15.65 MILLIMETERS NOMINAL MM
outside_edge_to_bolt_hole_center_distance_along_length15.65 MILLIMETERS NOMINAL MM
NSN5330-01-653-8927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1401-7324-1MM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 15.65 MILLIMETERS NOMINAL MM
•
BOLT HOLE QUANTITY: 2
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 15.65 MILLIMETERS NOMINAL MM
•
MATERIAL: RUBBER OVERALL
•
HOLE DIAMETER: 11.5 MILLIMETERS NOMINAL ALL HOLES MM
TECHNICAL CHARACTERISTICS
OVERALL LENGTH130.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH46.0 MILLIMETERS NOMINAL MM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH15.65 MILLIMETERS NOMINAL MM
BOLT HOLE QUANTITY2
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH15.65 MILLIMETERS NOMINAL MM
END ITEM IDENTIFICATION2355-01-5602318
MATERIALRUBBER OVERALL
HOLE DIAMETER11.5 MILLIMETERS NOMINAL ALL HOLES MM
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1401-7324-1MM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1401-7324-1MM?
1401-7324-1MM is a GASKET.
What is the NSN for 1401-7324-1MM?
1401-7324-1MM is cataloged in the U.S. Government catalog under NSN 5330-01-653-8927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1401-7324-1MM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.