PartsTable
Technical Data Sheet
Download PDF

14008D0029-8 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14008D0029-8: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 6.97 INCHES NOMINAL IN, length: 9.16 INCHES NOMINAL IN, raised_surface_height: 1.52 INCHES NOMINAL IN, end_item_identification: 01-615-9020, raised_surface_diameter: 2.99 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-666-3333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14008D0029-8
NSN: 5340-01-666-3333
FSC: 5340 — Hardware, Commercial
CAGE: 550C1 — CAROLINA GROWLER INC DIV GROWLER MANUFACTURING AND ENGINEERING (USA)
SPECIFICATIONS
shapeRECTANGULAR
width6.97 INCHES NOMINAL IN
length9.16 INCHES NOMINAL IN
raised_surface_height1.52 INCHES NOMINAL IN
mounting_hole_quantity4
end_item_identification01-615-9020
raised_surface_diameter2.99 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyPENNANT PLATE, RIGHT, ROLL DOOR
NSN5340-01-666-3333
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14008D0029-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
LENGTH: 9.16 INCHES NOMINAL IN
•
RAISED SURFACE HEIGHT: 1.52 INCHES NOMINAL IN
•
RAISED SURFACE DIAMETER: 2.99 INCHES NOMINAL IN
•
SHAPE: RECTANGULAR
•
WIDTH: 6.97 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
LENGTH9.16 INCHES NOMINAL IN
RAISED SURFACE HEIGHT1.52 INCHES NOMINAL IN
RAISED SURFACE DIAMETER2.99 INCHES NOMINAL IN
SHAPERECTANGULAR
WIDTH6.97 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPENNANT PLATE, RIGHT, ROLL DOOR
END ITEM IDENTIFICATION01-615-9020
SUBSTITUTES & CROSS-REFERENCES 2
14008D0029Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
HL413V-8-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14008D0029-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14008D0029-8?
14008D0029-8 is a PLATE,MOUNTING.
What parts can replace 14008D0029-8?
There are 2 known substitutes for 14008D0029-8: 14008D0029, HL413V-8-16. Substitute compatibility should be verified for your specific system.
What is the NSN for 14008D0029-8?
14008D0029-8 is cataloged in the U.S. Government catalog under NSN 5340-01-666-3333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14008D0029-8