PartsTable
Technical Data Sheet
PartsTable / MRO / 1400011
1400011 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hole_diameter: 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, pressure_rating: 3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS, overall_diameter: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-076-9900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1400011
NSN: 5310-00-076-9900
FSC: 5310
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hole_diameter0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
pressure_rating3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
overall_diameter0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
special_featuresACTION ID 45419155
surface_treatmentANODIZE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationCONSTANT SPEED DRIVE 727429A A
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-076-9900
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1400011 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-Q-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ANODIZE OVERALL
•
OVERALL DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-Q-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
HOLE DIAMETER0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTANODIZE OVERALL
OVERALL DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
14000-11Interchangeable
interchangeable cross-reference
interchangeable
4H90207-105CInterchangeable
interchangeable cross-reference
interchangeable
14000-13Interchangeable
interchangeable cross-reference
interchangeable
2498-002-102M-X5P0-4KVInterchangeable
interchangeable cross-reference
interchangeable
5903947Interchangeable
interchangeable cross-reference
interchangeable
A8889Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1400011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1400011?
1400011 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1400011?
There are 6 known substitutes for 1400011: 14000-11, 4H90207-105C, 14000-13 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1400011?
1400011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-076-9900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1400011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026