PartsTable
Technical Data Sheet
Download PDF

1400-0973 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1400-0973: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, hole_diameter: 0.072 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN, overall_height: 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), style_designator: STANDOFF, surface_treatment: TIN OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-950-2927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1400-0973
NSN: 5340-00-950-2927
NIINs: 009502927, 013795153
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCOPPER OVERALL
hole_diameter0.072 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
hole_quantity1
overall_height0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
surface_treatmentTIN OVERALL
material_thickness0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
NSN5340-00-950-2927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1400-0973 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.138 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.427 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
MATERIAL THICKNESS0.011 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.138 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.427 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
6180-1AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1400-0973?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1400-0973?
1400-0973 is a CLIP,SPRING TENSION.
What parts can replace 1400-0973?
There is 1 known substitute for 1400-0973: 6180-1A. Substitute compatibility should be verified for your specific system.
What is the NSN for 1400-0973?
1400-0973 is cataloged in the U.S. Government catalog under NSN 5340-00-950-2927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1400-0973

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.