PartsTable
Technical Data Sheet
Download PDF

140-092 — RESISTOR,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

140-092: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.750 INCHES NOMINAL IN, overall_length: 5.469 INCHES NOMINAL IN, aperture_diameter: 3.750 INCHES NOMINAL IN, electrical_resistance: 620.000 OHMS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-173-3576, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 140-092
NSN: 5330-00-173-3576
NIINs: 001733576, 010046085
FSC: 5330 — Packing and Gasket Materials
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.750 INCHES NOMINAL IN
overall_length5.469 INCHES NOMINAL IN
aperture_diameter3.750 INCHES NOMINAL IN
electrical_resistance620.000 OHMS
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
resistance_tolerance_in_percent-5.000 TO 5.000
power_dissipation_rating_in_watts0.250 FREE AIR
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-173-3576
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 140-092 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 3.750 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE OVERALL
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH5.469 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.750 INCHES NOMINAL IN
APERTURE DIAMETER3.750 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 4
5340292Reference document
Same NSN cross-reference
Reference document — Secondary reference
1B6527Reference document
Same NSN cross-reference
Reference document — Secondary reference
802H2Reference document
Same NSN cross-reference
Reference document — Secondary reference
5E6315Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 140-092?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 140-092?
140-092 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 140-092?
There are 4 known substitutes for 140-092: 5340292, 1B6527, 802H2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 140-092?
140-092 is cataloged in the U.S. Government catalog under NSN 5330-00-173-3576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 140-092

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.