PartsTable
Technical Data Sheet

14.10.1.004/9 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14.10.1.004/9: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 8.224 INCHES NOMINAL IN, center_hole_diameter: 8.000 INCHES NOMINAL IN, cross-sectional_height: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-136-8670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14.10.1.004/9
NSN: 5330-00-136-8670
FSC: 5330 — Packing and Gasket Materials
CAGE: K3732 — HEIL TRAILER INTERNATIONAL LTD (GBR)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter8.224 INCHES NOMINAL IN
center_hole_diameter8.000 INCHES NOMINAL IN
cross-sectional_height0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-00-136-8670
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14.10.1.004/9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 8.224 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 8.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER8.224 INCHES NOMINAL IN
CENTER HOLE DIAMETER8.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
701944Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 14.10.1.004/9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14.10.1.004/9?
14.10.1.004/9 is a PACKING,PREFORMED.
What parts can replace 14.10.1.004/9?
There is 1 known substitute for 14.10.1.004/9: 701944. Substitute compatibility should be verified for your specific system.
What is the NSN for 14.10.1.004/9?
14.10.1.004/9 is cataloged in the U.S. Government catalog under NSN 5330-00-136-8670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14.10.1.004/9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.