PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14.10.1.004/6
14.10.1.004/6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 14.10.1.004/6 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-339-5319, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14.10.1.004/6
NSN: 5330-00-339-5319
FSC: 5330
CAGE: K3732 — HEIL TRAILER INTERNATIONAL LTD (GBR)
SPECIFICATIONS
Part Number14.10.1.004/6
NSN5330-00-339-5319
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14.10.1.004/6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE DIAMETER: 4.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER OVERALL
•
BOLT HOLE QUANTITY: 6
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER4.500 INCHES NOMINAL IN
APERTURE DIAMETER3.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER OVERALL
BOLT HOLE QUANTITY6
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER5.250 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
11660814-1Interchangeable
interchangeable cross-reference
interchangeable
143343Interchangeable
interchangeable cross-reference
interchangeable
L2-6289-20Interchangeable
interchangeable cross-reference
interchangeable
18236Interchangeable
interchangeable cross-reference
interchangeable
L090 5-8X5-8Interchangeable
interchangeable cross-reference
interchangeable
3824644Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14.10.1.004/6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14.10.1.004/6?
14.10.1.004/6 is a 14.10.1.004/6.
What parts can replace 14.10.1.004/6?
There are 9 known substitutes for 14.10.1.004/6: 11660814-1, 143343, L2-6289-20 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14.10.1.004/6?
14.10.1.004/6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-339-5319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14.10.1.004/6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026