PartsTable
Technical Data Sheet
Download PDF

14-96-1 — BUR,DENTAL,EXCAVATING

✓ Government record, cited
SES Creative · MRO · MRO_GENERAL
PRODUCT OVERVIEW

14-96-1: BUR,DENTAL,EXCAVATING.

Can't get enough of emoticons? Then this stamp set is for you. Create the cutest drawings with this SES stamp set.

Colour in the faces with the pencils included. And if the ink dries out? You can easily activate it again with a few drops of water.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-618-4262, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 14-96-1
NSN: 5340-00-618-4262
NIINs: 006184262, 009049623, 009233700, 010033919, 012169761, 012796344
FSC: 5340 — Hardware, Commercial
CAGE: 72447 — DANA COMMERCIAL VEHICLE MANUFACTURING, LLC DBA DANA COMMERCIAL VEHICLE PRODUCTS (USA)
SPECIFICATIONS
width3.500 INCHES NOMINAL IN
length6.500 INCHES NOMINAL IN
materialPLASTIC
end_shapeROUND
head_shapeROUND
inscriptionPANIC STOP
display_typeFULL
hole_diameter0.344 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_stylePOINTED
surface_treatmentPASSIVATE OVERALL
pin_overall_length0.655 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
NSN5340-00-618-4262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14-96-1 MFR: SES Creative ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 6.500 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 2
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
•
SECURING DEVICE TYPE: THREADED FASTENER
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 1.750 INCHES NOMINAL IN
•
WIDTH: 3.500 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
LENGTH6.500 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH2
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE
SECURING DEVICE TYPETHREADED FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH1.750 INCHES NOMINAL IN
WIDTH3.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
HOLE DIAMETER0.344 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
6184262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
360144Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 14-96-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-96-1?
14-96-1 is a BUR,DENTAL,EXCAVATING manufactured by SES Creative. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14-96-1?
There are 2 known substitutes for 14-96-1: 6184262, 360144. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-96-1?
14-96-1 is cataloged in the U.S. Government catalog under NSN 5340-00-618-4262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-96-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.