PartsTable
Technical Data Sheet
Download PDF

14-70047-07 — GEARSHAFT,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

14-70047-07: GEARSHAFT,SPUR.

The GEARSHAFT,SPUR is a the manufacturer industrial component. Key specifications include face_width: 0.186 INCHES NOMINAL IN, shaft_type: SHOULDERED, gear_material: STEEL, overall_length: 2.247 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, shaft_end_size: 0.374 INCHES AND 0.393 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-01-357-5717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14-70047-07
NSN: 3040-01-357-5717
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
face_width0.186 INCHES NOMINAL IN
shaft_typeSHOULDERED
gear_materialSTEEL
overall_length2.247 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
shaft_end_size0.374 INCHES AND 0.393 INCHES IN
shaft_end_typeCIRCULAR GROOVED AND PLAIN
shaft_materialSTEEL
teeth_quantity51
diametral_pitch24
hardness_rating88.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 90.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
gear_outside_diameter2.208 INCHES NOMINAL IN
NSN3040-01-357-5717
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEARSHAFT,SPUR TITLE COMPONENT PN 14-70047-07 MFR GEARSHAFT,SPUR
KEY FEATURES
•
SHAFT TYPE: SHOULDERED
•
SHAFT MATERIAL: STEEL
•
SHAFT LARGEST DIAMETER: 0.926 INCHES NOMINAL IN
•
SHAFT END SIZE: 0.374 INCHES AND 0.393 INCHES IN
•
TEETH QUANTITY: 51
•
DIAMETRAL PITCH: 24
•
GEAR OUTSIDE DIAMETER: 2.208 INCHES NOMINAL IN
•
LONGER SHAFT SEGMENT LENGTH: 1.077 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHAFT TYPESHOULDERED
SHAFT MATERIALSTEEL
SHAFT LARGEST DIAMETER0.926 INCHES NOMINAL IN
SHAFT END SIZE0.374 INCHES AND 0.393 INCHES IN
TEETH QUANTITY51
DIAMETRAL PITCH24
GEAR OUTSIDE DIAMETER2.208 INCHES NOMINAL IN
LONGER SHAFT SEGMENT LENGTH1.077 INCHES NOMINAL IN
HARDNESS RATING88.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 90.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
OVERALL LENGTH2.247 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224
SUBSTITUTES & CROSS-REFERENCES 1
14-70047-CHReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14-70047-07?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14-70047-07?
14-70047-07 is a GEARSHAFT,SPUR.
What parts can replace 14-70047-07?
There is 1 known substitute for 14-70047-07: 14-70047-CH. Substitute compatibility should be verified for your specific system.
What is the NSN for 14-70047-07?
14-70047-07 is cataloged in the U.S. Government catalog under NSN 3040-01-357-5717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14-70047-07

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.